Kodak EASYSHARE Z980 Extended User Manual page 62

Troubleshooting
If
In Review mode,
you do not see a
picture (or the
expected picture)
on the LCD or EVF.
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
Slide show does
not run on external
video device.
Picture is too light.
Picture is not clear.
Picture is too dark.
56
Try one or more of the following
■
Check the image storage location setting
■
Transfer the picture to the computer
card or internal memory
CAUTION: Formatting a card deletes all pictures and videos,
including protected files.
■
Check the cable connections.
■
Adjust the camera Video Out setting (NTSC or PAL,
■
See the external device's user's guide.
■
Turn off the flash, or move so there is at least 2 ft (0.6 m) between the
camera and the subject.
■
Decrease Exposure Compensation
■
Clean the lens (see page
■
Make sure your camera is not in Close-up mode.
■
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■
Press the shutter button halfway to focus and set exposure. When the
framing brackets turns green, press the Shutter button completely
down.
■
Place the camera on a flat, steady surface or use a tripod.
■
Turn on the flash
■
Move so there is no more than 11.8 ft (3.6 m) in wide angle and
6.9 ft (2.1 m) in telephoto between the camera and the subject.
■
Use Fill flash (see page
behind the subject.
■
Increase Exposure Compensation
(see page 46).
(see page
68).
(see page 14).
14) or change your position so light is not
(see page
www.kodak.com/go/support
(page 44).
(see page 48), then format the
see page
21).
21).
45).