Panasonic CQ-VD7700U Installation Instructions Manual page 14

Electrical Connections
E
N
G
L
I
S
Connection with Rear Monitor
H
21 Note: Refer to the operating instructions for the connected devices, in addition.
Hide-away Unit
(R)
(Red)
(Video)
(L)
(Yellow)
(White)
(R)
(Red)
RCA Cord (Option)
Connection with Headrest Monitor
Note: Refer to the operating instructions for the connected
devices, in addition.
CQ-VD7700U
Hide-away Unit
(Rear)
RCA cord (option)
Power Lead
(Supplied with CY-V7100U)
ACC 3 A
ACC Power Lead (Red)
Ground Lead (Black)
26
CQ-VD7700U
(continued)
CQ-VD7700U
(Rear)
Over-head Monitor
CY-VMX6800U
(option)
(Video)
(Yellow)
(L) (White)
Caution: For people sitting in the front seats, please
enjoy only audio during driving.
CY-V7100U
Display Unit
(R) (Video)
(Red) (Yellow)
PHONES
(L) (White)
(L) (White)
(Video)
(R)
(Yellow)
(Red)
VTR 1
VTR 2
(Front) (Rear)
CY-V7100U
Hide-away Unit
Junction Cable
(Supplied with CY-V7100U)
Note: Refer to the operating instructions for the connected devices, in addition.
Connecting the Reverse Lead
CY-V7100U If using an optional rear view camera, the reverse lead must
be connected.
Connect the reverse lead (violet/white stripe) to the positive (+)
lead of the reverse lamp (the lamp with a clear lens that lights
when the transmission gear is shifted into the reverse position).
Notes:
¡Connect the reverse lead after cutting the terminal at the end.
¡Use a Reverse Extension Cord @3 if needed.
DIN Connector
Connection with Rear View Camera
CQ-VD7700U
Display Unit (Rear)
Rear View Camera
@2 Power Connector
CAMERA-IN
Camera Input
(Black)
Remove the vinyl cap when connecting.
Reverse lamp
Clip connector
(option)
REVERSE
Reverse Lead (Violet/white stripe)
Cut here.
Rear View Camera
Control Unit
(option)
Camera Input
(Video)
(Yellow)
(option)
RCA Cord (Option)
(Video)
(Yellow)
Check the reverse lamp.
Take it out of the back of
the tail lamp mount.
Car chassis
Battery
P
R
Transmission gear
N
D
2
L
CQ-VD7700U
E
N
G
L
I
S
H
22
27