Turning The Scansnap On/Off - Fujitsu ScanSnap S1100 Operator's Manual

Turning the ScanSnap ON/OFF

This section explains how to turn the ScanSnap ON/OFF.
The ScanSnap is turned ON/OFF in conjunction with the computer. Therefore, you do not
have to worry about turning the power ON/OFF as long as the ScanSnap is connected to a
computer.
Turning the ScanSnap on
Open the feed guide when the computer is turned on.
The [Scan/Stop] button flashes blue to indicate that the ScanSnap is turned on, and
lights in blue when the ScanSnap is ready to scan.
Turning the ScanSnap off
Turn off the computer or close the feed guide.
The [Scan/Stop] button switches off when the ScanSnap is turned off.
With some computers, the initialization of the ScanSnap may be performed several
times when the computer is started up.
With some computers, it may take two to three minutes until the light of the [Scan/Stop]
button goes out after the computer is turned off.

Turning the ScanSnap ON/OFF

25