Display Settings - Kenwood DPX301U Instruction Manual

DISPLAY SETTINGS

1 Press FNC to enter [FUNCTION].
2
Turn the volume knob to select [DISPLAY], then press the
knob.
3 Turn the volume knob to make a selection (see the following
table), then press the knob.
4 3
Repeat step until the desired item is selected/activated or
follow the instructions stated on the selected item.
5
Press and hold
To return to the previous setting item, press
COLOR SELECT VARIABLE SCAN/ CUSTOM R/G/B/ preset colors*: Selects your
preferred button and display illumination color.
You can create your own color (when [CUSTOM R/G/B] or preset
colors* is selected). The color you have created can be stored in
[CUSTOM R/G/B].
1 Press and hold the volume knob to enter the detailed color
adjustment.
2 Press S / T to select the color (R/ G/ B) to adjust.
3 Turn the volume knob to adjust the level (0 — 9), then press the
knob.
DIMMER ON: Dims the display illumination and button illumination. ;
OFF: Cancels.
BRIGHTNESS 0 — 31: Selects your preferred brightness level for display
illumination and button illumination.
TEXT SCROLL AUTO/ ONCE: Selects whether to scroll the display information
automatically, or scroll only once. ; OFF: Cancels.
* Preset colors: RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/
BLUE1/ BLUE2/ BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/ AQUA2/
GREEN1/ GREEN2/ GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/ YELLOW/
ORANGE1/ ORANGE2/ ORANGERED
JS_KWD_DPX301U_KN_EN_3.indd 15
to exit.
.
TROUBLESHOOTING
Symptom
Sound cannot be heard.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND SERVICE"
appears.
The unit does not work at all.
Default: XX
• Radio reception is poor.
• Static noise while listening
to the radio.
Disc cannot be ejected.
Noise is generated.
Tracks do not play back as
you intended them to play.
"READING" keeps flashing.
Elapsed playing time is not
correct.
Correct characters are not
displayed (e.g. album name).
"NA FILE"
"NO DISC"
"TOC ERROR"
"PLEASE EJECT"
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals of the
speaker wires are insulated properly. Turn the power on again.
Send the unit to the nearest service center.
Reset the unit. ( 3)
• Connect the antenna firmly.
• Pull the antenna out all the way.
Press and hold M to forcibly eject the disc. Be careful not to drop
the disc when it is ejected. If this does not solve the problem,
reset the unit. ( 3)
Skip to another track or change the disc.
Playback order is determined when files are recorded.
Do not use too many hierarchical levels or folders.
This is caused by how the tracks are recorded.
This unit can only display uppercase letters, numbers, and a
limited number of symbols.
Make sure the disc contains supported audio files. ( 17)
Insert a playable disc into the loading slot.
Make sure the disc is clean and inserted properly.
Reset the unit. If this does not solve the problem, consult your
nearest service center.
15
ENGLISH
13/10/2014 5:13:22 PM