Configuring An Automatic Update - Gigaset SX763 First Steps

Administration

Configuring an automatic update

ì
Choose Update server as Firmware update source.
The field Firmware update server shows the server address where your device
checks whether a new firmware version is available. This is the default address and
normally should not be changed.
If required, change the preset update server using the Change button. Enter the URL
of the desired update server and click Apply.
ì
Check periodically: If Update server is selected, your device can periodically check
on the update server whether a new firmware version is available. If this is the case,
you will be informed when you are surfing the Internet.
ì
Choose from the option menu if the device should search for updates:
Every day, Every week or Every month.
If you choose Never, you can start the firmware update with by clicking check for
updates.
ì
Click OK to apply the settings.
Automatic firmware update
If you have configured the option Check periodically and a new firmware version of
your Gigaset SX763 WLAN dsl is detected while you are surfing the Internet an informa-
tion page is opened. On this page you can choose whether the update should be
started.
ì
Click Perform update now! to start the update.
ì
Enter the system password (see page 127) on the next page.
ì
Click OK. The firmware will now be updated.
User requested check
ì
Click check for updates in order to check whether new updates are available on the
selected update server.
If a new firmware is available, an information page is opened. On this page you can
choose whether the update should be started.
ì
Click on Perform update now! to start the update.
ì
Click OK. The firmware will now be updated.
Warning:
Do not turn off the Gigaset SX763 WLAN dsl during the updating procedure and do
not interrupt the power supply. Turning off the device can make it unusable. The
update can take several minutes.
Gigaset Communications GmbH accepts no liability for damage that occurs through
improper use.
134