Usb - Gigaset SX763 First Steps

Configuring Advanced Settings

USB

The USB port of your Gigaset SX763 WLAN dsl can be used to set up a
File Server to share a USB mass storage device (page 113)
Print Server to share a printer (page 119)
Web Server to provide a Web server (page 119)
Notes:
If you connect a USB hub to the USB port of the Gigaset SX763 WLAN dsl, you can
u
connect and use a USB memory and a USB printer at the same time.
If connecting a device without its own power supply directly to the USB port,
u
please note that the power consumption must not exceed 500 mA.
The Gigaset SX763 WLAN dsl supports USB V 2.0. Devices that support USB V 1.1
u
may also be connected.
The following file system formats are supported: FAT, FAT32, VFAT
u
NTFS is not supported.
There should be not more than 1000 files stored in any directory of the USB mass
u
storage device.
ì
Go to the Advanced Settings menu and select: USB
ì
Select the On option for USB.
ì
Click OK to activate the USB port.
If a USB device is connected, its Status is displayed. If a USB mass storage device is con-
nected, the partitions are displayed.
ì
Click Refresh to display the current status.
112