Application In Accordance With Regulations - Reloop Digital Jockey Controller Edition Operation Manual

- Do not operate the device under extremely hot (in excess of 35° C) or
extremely cold (below 5° C) conditions. Keep the device away from direct
exposure to the sun and heat sources such as radiators, ovens, etc. (even
during transport in a closed vehicle). Never cover the cooling fan or vents.
Always ensure sufficient ventilation.
- The device must not be operated after being taken from a cold environment
into a warm environment. The condensation caused hereby may destroy
your device. Do not switch on or operate the device until it has reached
ambient temperature!
- Controls and switches should never be treated with spray-on cleaning agents
and lubricants. This device should only be cleaned with a damp cloth. Never
use solvents or cleaning fluids with a petroleum base for cleaning.
- When relocating, the device should be transported in its original packaging.
- When starting operation, the crossfaders and volume controls of your
amplifier must be set to minimum level. Bring the loudspeaker switches into
the "OFF" position. Wait between 8 to 10 seconds before increasing the
volume to avoid shot noise created by transient effect, which could cause
damage to loudspeakers and the diplexer.
- Devices supplied by voltage should not be left in the hands of children.
Please exercise particular care when in the presence of children.
- At commercial facilities the regulations for the prevention of accidents as
stipulated by the organization of professional associations must be
observed.
- At schools, training facilities, hobby and self-help workshops the operation of
the device must be monitored with responsibility by trained staff.
- Keep this operation manual in a safe place for later reference in the event of
questions or problems.

APPLICATION IN ACCORDANCE WITH REGULATIONS

- This device is a professional DJ MIDI controller that can control software. The
device should be connected via USB cable to a computer.
- This product is authorised for connection to 240 V, 50 Hz AC and is designed
exclusively for indoor application.
- If the device is used for any other purposes than those described in the
operation manual, damage can be caused to the product, leading to
exclusion of warranty rights. Moreover, any other application that does not
comply with the specified purpose harbours risks such as short circuit, fire,
electrical shock, etc.
- The serial number determined by the manufacturer must never be removed
to uphold the warranty rights.
29