Figure 1: OMX-DA10XL Video Audio Distribution Amplifier Figure 2: Increasing the Outputs: Arranging a 1:30 Video Audio DA Tables Table 1: Front Panel OMX-DA10XL Video Audio Distribution Amplifier Features Table 2: Rear Panel OMX-DA10XL Video Audio Distribution Amplifier Features Table 3: Technical Specifications of the OMX-DA10XL...
• Has front panel video trimmer controls for output level and cable 1 For example, you can connect 3 OMX-DA10XL units to make a 1:30 video audio distribution amplifier. See section 4.2 for details 2 Recommended for low signal transmission over long distances or in audio broadcasting studios for high quality signal recreation 3 The video outputs are arranged in two blocks of 5 outputs (outputs 1 to 5, and outputs 6 to 10).
OMX-DA10XL Figure 1 and Table 1 define the Video Audio Distribution Amplifier: Figure 1: OMX-DA10XL Video Audio Distribution Amplifier Table 1: Front Panel OMX-DA10XL Video Audio Distribution Amplifier Features Feature Function Power Switch Illuminated switch supplying power to the unit...
3 Switch OFF the power on each device before connecting it to your OMX-DA10XL. After connecting your OMX-DA10XL, switch on its power and then switch on the power on each device 4 As required. Up to 10 outputs can be connected on the OMX-DA10XL. Not all outputs need to be connected 5 For example, VCR units...
(EQ.) thus achieving different compensations for different cable lengths 3 Switch OFF the power on each device before connecting it to your OMX-DA10XL units. After connecting the OMX-DA10XL units, switch on their power and then switch on the power on each device...
Using the OMX-DA10XL Video Audio Distribution Amplifier OMX-DA10XL 5. On the first and second units, release the Term button. OMX-DA10XL On the third unit, push in the Term button to terminate the line to 75Ω. OMX-DA10XL 6. On each unit: •...