Set-Up Menu - Sony Bravia KLV-32T400A Operating Instructions Manual

Display Area
Horizontal Shift
Vertical Shift
Vertical Size

Set-up menu

Press MENU and select "Settings". Press
Auto Start-up
Language
AV Set-up
28
GB
Adjusts the screen area for displaying the picture.
"Normal": Displays the picture in the original size.
"-1"/"-2": Enlarges the picture to hide the edge of the picture.
Adjusts the horizontal position of the picture.
Adjusts the vertical position of the picture when "Wide Mode" is set to "Zoom".
Adjusts the vertical size of the picture when "Wide Mode" is set to "Wide Zoom" or
"Zoom".
F/f
to select the "Set-up" icon (
Starts the initial set-up procedure.
Usually, you do not need to do this operation because it was done when the TV was
first installed (page 8).
However, this option allows you to repeat the process (e.g. to retune the TV after
moving house, or to search for new channels that have been launched by
broadcasters).
Selects the language in which the menus are displayed.
Video Labels
Assigns a name to any equipment connected to the side (refer A in page 19) and rear
jacks. The name will be displayed briefly on the screen when the equipment is
selected. You can skip input signals from connected equipment that you do not want
displayed on the screen.
F f
1 Press
/ to select the desired input source, then press
F f
2 Press
/ to select the desired option below, then press
Equipment labels: Uses one of the preset labels to assign a name to connected
equipment.
"Edit:": Creates your own label. Follow steps 2 to 4 of "Programme Labels"
(page 31).
"Skip": Skips an unnecessary input source.
Speaker
Turns on/off the TV's internal speakers.
"TV Speaker": The TV speakers are turned on in order to listen to the TV's sound
through the TV speakers.
"Audio System": The TV speakers are turned off in order to listen to the TV's sound
only through your external audio equipment connected to the audio output jacks.
• All items in "Sound" menu except "Dual Sound" are not available when "Speaker"
is set to "Audio System".
Colour System
Selects the colour system ("Auto", "PAL", "SECAM", "NTSC3.58", "NTSC4.43"
or "PAL60") according to the composite video signal from the input source.
.
), then press
.
.