Kodak EasyShare M1033 User Manual page 51

Status
Battery life is short
You cannot take a
picture
Error message appears
on LCD
Memory card not
recognized or camera
freezes with card
Cannot find the
desired picture/video
Computer/connectivity problems
Status
Pictures do not
transfer to computer
Slide Show does not
run on an external
video device
www.kodak.com/go/support
Solution
■
Make sure the correct battery type is installed (see
■
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■
Insert a new or charged battery (see
■
Turn the camera off, then on again.
■
Depress the Shutter button all the way (see
■
Insert a new or charged battery (see
■
Memory is full. Transfer pictures to the computer (see
delete pictures (see
■
Turn the camera off, then on again.
■
Remove the memory card.
■
Turn off the camera. Remove the battery. Wipe the contacts with
a clean, dry cloth.
■
Insert a new or charged battery.
■
If the problem still exists, get help (see
■
Card may be corrupted. Format the card in the camera
page 33).
■
Use another memory card. Only SD or SDHC cards are supported.
■
To view pictures on a card or in internal memory,
Solution
■
See Help in EasyShare software.
■
Adjust the camera Video Out setting to NTSC or PAL
page 33).
■
Make sure the external device settings are correct. (See the
device's user's guide).
page
page
page 14), or insert another card.
Troubleshooting
page 54).
1).
page 5).
1).
page
page 48).
(see
see page
(see
36),
13.
45