Flash Button - Kodak EasyShare M1033 User Manual

Using the flash
Press the flash button repeatedly to scroll through flash modes.
The current flash mode is shown in the LCD status area.
Flash modes
Auto
Fill
Red Eye
Off
Your camera saves the flash setting, even after you turn off the camera.
www.kodak.com/go/support
Flash fires
When the lighting conditions require it.
Every time you take a picture, regardless of the lighting conditions. Use
when the subject is in shadow or is "backlit" (when the light is behind
the subject). In low light, hold the camera steady or use a tripod.
NOTE: (Not available in Smart Capture mode.)
Once to shrink the eye pupil, then again to light the subject.
Never
Taking pictures/videos
7