Table of Contents
Advertisement
Transferring, printing, tagging
Printing pictures
Direct printing with an EasyShare all-in-one printer
Your camera is compatible with PictBridge technology, so you can print directly to
PictBridge enabled printers. You need a camera with fully charged battery, a
PictBridge enabled printer, and a USB cable.
Connecting the camera to an EasyShare all-in-one printer
1 Turn off the camera and printer.
2 Connect the appropriate USB cable from the camera to the printer.
Printing from an EasyShare all-in-one printer
1 Turn on the printer. Turn on the camera.
The PictBridge logo is displayed, followed by the current picture and menu. (If no
pictures are found, a message is displayed.) If the menu turns off, press any button to
redisplay it.
2 Highlight a printing option, then press OK.
Current Picture—
Tagged Pictures—
printing and choose a print size.
Print thumbnails of all pictures. (This option requires one or more
Index Print—
sheets of paper.) If the printer is capable, choose a print size.
Print all pictures in internal memory, on a card, or in Favorites.
All Pictures—
Choose the number of copies.
Image Storage—
NOTE: During direct printing, pictures are not permanently transferred or saved to the printer. To transfer
pictures to your computer, see
Purchase cables, accessories www.kodak.com/go/m1033accessories,
Dock compatibility
38
Press
to choose a picture. Choose the number of copies.
If your printer is capable, print pictures that you tagged for
Access Auto or Internal Memory.
page
36. In Favorites mode, the current favorite picture is displayed.
www.kodak.com/go/dockcompatibility
m2008accessories
www.kodak.com/go/support
Hide quick links:
Advertisement
Table of Contents
