If...
You cannot take a
picture or video
Picture orientation is
not accurate
Flash does not fire
Battery life is short
Camera displays an
error code
Computer/connectivity problems
If...
The computer does
not communicate with
the camera
Try one or more of the following
■
Turn the camera off, then on again.
■
Press the Shutter button all the way
■
Battery is exhausted. Recharge the battery or insert a new
one
(page
2).
■
Wait until the ready light is green before attempting to
take another picture.
■
Transfer pictures to the computer
pictures from the camera
locations
(page
memory
(page
7).
■
Set the Orientation Sensor
■
Check flash setting, and change as needed
■
Recharge the battery fully or insert a new one
■
Press the Shutter button all the way
■
Battery is exhausted. Recharge the battery fully
■
Wait until the ready light is green before attempting to
take another picture.
■
Transfer pictures to the computer
pictures from the camera
locations
(page
memory
(page
7).
■
Contact your local service provider or visit
www.kodak.com/go/support.
Try one or more of the following
■
Turn on the camera.
■
Recharge the battery or insert a new one
■
Make sure USB cable is securely connected on camera and
computer port
(page
■
Try another USB port on the computer.
■
Make sure the EasyShare software is installed
■
See the EasyShare software Help.
(page
(page
24), switch image storage
19), or insert a card with available
(page
20).
(page
(page
24), switch image storage
19), or insert a card with available
36).
Troubleshooting
(page
8).
36), delete
(page
14).
(page
2).
(page
8).
(page
2).
36), delete
(page
2).
(page
30).
39