Klutch 24V Cordless 1/2in. Impact Wrench Instruction Manual page 5

OPERATING PROCEDURES
GETTING TO KNOW YOUR CORDLESS TOOL/CHARGER
24V CORDLESS 1/2in. IMPACT WRENCH:
1/2in. Square Socket Drive
1.
2. Metal Gear Housing
3. Ventilation Slots
4. Forward / Reverse / Neutral Lock Switch
5. Variable Speed Trigger Switch
6. Padded Hand Grip
7. Battery Release Button
8. Battery Pack
2
1
GENERAL
•
This tool is intended for use with 1/2in. drive impact sockets for loosening ond
tightening nuts and bolts. Its impacts help to turn stiff fasteners.
•
To prolong the life of the tool, do not use it continuously for more than 20
minutes at a time.
•
If the tool shows signs of diminishing power, stop and recharge the battery.
Using it to do heavy work when the battery is weak drains the battery very
quickly and can damage the battery.
•
To use the tool, first start the fastener on the thread by hand, being sure it is
not cross-threaded.
•
Choose a 1/2in. drive socket of the correct size and mount it on the drive shaft.
•
Place the socket over the fastener.
•
Use the variable speed only for starting.
•
Allow the tool to come up to full speed.
•
When you hear the sound of the impacts, stop after three or four. The fas-
tener is tight.
VARIABLE SPEED
You can vary the spindle rotation speed by modulating finger pressure on the trigger.
3
5
6
7
8
4