Precautions - ADEMCO ACM380E Instruction Manual

PRECAUTIONS

1. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or cover. There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
2. Handle the camera with care.
Do not abuse the camera. Avoid striking or shaking it as the camera could be damaged by improper
use or storage.
3. Do not expose the camera to rain, moisture or try to operate it in wet areas.
Take immediate action if the camera becomes wet. Turn power off and refer servicing to qualified service
personnel as moisture can damage the camera and also create the danger of electric shock.
4. Never face the camera toward the sun. Permanent damage may occur when subjected to intense light.
(Whether the camera is in use or not) Use cautiously when operating any electrical device.
Keep the camera out of the direction of spotlights and light reflecting objects.
5. Do not operate the camera beyond its temperature, humidity or power source ratings.
Do not use the camera in an extreme environment where high temperature or high humidity conditions exist.
Use the camera under conditions where temperatures are within -10~+50°C, and humidity is below 80%
Relative Humidity.
6. Do not touch the CCD sensor directly with your fingers. If necessary, use soft cloth moistened
with alcohol to wipe off the dust.
7. When the camera is not in use, keep the cap on the lens to protect the CCD sensor.
8