Transferring Pictures; When Using A Tripod - Kodak EASYSHARE DX3900 User Manual

Transferring Pictures

To transfer pictures from your camera to your computer:
m
If installed, KODAK Picture Transfer Software automatically opens on your
computer and your pictures are transferred.
You can also transfer your pictures manually while the green light is
blinking. See
m
Then, KODAK Picture Software opens so you can work with your pictures
on your computer. For further details, see
Your Computer.
NOTE: When your pictures are transferred, leave the camera in the Camera
Dock. Ten minutes after the transfer is complete, the Camera Dock
begins to monitor battery power and then begins charging whenever
necessary.

When Using a Tripod

For stability when using a tripod, remove the camera from the Camera Dock
and connect the tripod directly to the camera, rather than through the Camera
Dock.
The camera tripod socket is located on the bottom of the camera.
Chapter 8
1
Connect
2
page 52.
Place the camera in the Camera Dock.
Push the Connect button.
m
The Camera Dock light blinks green
while the connection to the computer is
active.
Chapter 7, Using Pictures on
59