Setting Video Quality - Kodak DX3600 User Manual

Self Timer light
The Self Timer feature turns off after you take the video.

Setting Video Quality

Use the Video Quality setting to select a video resolution.
1 Turn the Mode dial to Video
2 Highlight the Video Quality menu
28
Chapter 3
Take the video:
1
Place the camera on a flat steady surface, or
use a tripod.
2
Compose the picture, then press the Shutter
button. See page 25
The LCD turns off. The red Self Timer
light, located on the front of the camera,
turns on for 8 seconds, then blinks for 2
seconds until the video begins recording.
While the camera is recording, the Self
Timer light glows steady red, then goes off
when recording stops.
, then press the Menu button.
, then press the Select button.
3
Highlight the Quality setting you want to use.
Best (320 x 240)—for more detail, good
for display on a television or computer
monitor. Produces higher resolution and
larger file sizes (320 x 240 pixels).
When Best Quality is set, two stars
displayed in the LCD status bar.
Good (160 x 120)—for e-mailing, or
LCD display. Produces lower resolution and
smaller file sizes (160 x 120 pixels), good
for conserving space in internal memory or
on the Picture Card.
for two ways to record.
are