Attaching the Wrist Strap and Lens Cap
Loading the Battery
A KODAK Lithium Battery, KCRV3 (or equivalent) is included.*
See
page 62
for the types of batteries you can use in your camera. For
acceptable battery life and to make sure your camera operates dependably,
do not use alkaline batteries.
NOTE: * AA lithium batteries may be provided. If your camera was packaged
with a KODAK EASYSHARE Camera Dock, the KODAK Ni-MH
Rechargeable Battery Pack is provided. For details on charging and
loading the Battery Pack, see
Chapter 1
Thread the wrist strap as shown.
Thread the lens cap string through the loop
in the wrist strap as shown in the inset.
1
Open the battery door.
2
Insert the battery as shown.
3
Close the battery door.
NOTE: If the battery is removed after Date/Time
are set
(page
the settings for approximately 10
minutes.
page
42.
27), the camera will retain
3