Fm Operation - Blaupunkt BPT6021BT Instruction Manual

2.1ch sound tower with bluetooth
Table of Contents

Advertisement

1.
The range of FM frequency is from 87.50MHz to 108.00MHz.
2. Press SOURCE button or FM button to enter FM mode.
3. Extend the antenna as far as it can to get the best reception.
4. Press MO/ST button on remote control to turn on or off the stereo. If the reception is
not good enough, it can turn on the stereo.
SEARCH
Press SEARCH button to search stations from low to high frequency; press again to
stop searching. After searching all the stations, it starts playing from the first station.
SELECT STATIONS
7
or 8
1) Press
button to adjust the frequency up or down the frequency by 0.05MHz.
2) Press NUMBER buttons directly to selection the stations.
E.g. to play the station 24, press 2, then press 4 to skip to station 24.
3) Press -/-- button, then press NUMBER buttons on remote to select frequency.
E.g. to select 104.50MHz, press -/-- button, then press 1, 4, 5, 0 to enter 104.50MHz.
4) Press PREVIOUS or NEXT button to skip to the previous or next station.
SAVE STATIONS
1) Press NUMBER buttons to select the preset number for saving the wanted station.
2) Press -/-- button and number buttons to select the frequency.
3) Press SAVE button to save the wanted station/frequency into the preset number.
E.g. to save the station 88.50MHz into preset 13, press 1, 3 to select preset 13, then
press -/-- and next press 8, 8, 5, 0 to select 88.50MHz, at last press SAVE button.

FM operation

8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents