Transferring Pictures; Using A Tripod - Kodak DX3500 User Manual

Transferring Pictures

To transfer pictures from your camera to your computer:
NOTE: When your pictures are transferred, leave the camera in the Camera
Dock. 8 minutes after the transfer is complete, the Dock & Go begins to
monitor battery power and then begins charging whenever necessary.

Using a Tripod

For stability when using a tripod, remove the camera from the Camera Dock
and connect the tripod directly to the camera tripod socket, rather than
through the Camera Dock.
The camera tripod socket is located on the bottom of the camera.
Chapter 7
1 Place the camera in the Camera Dock.
Connect
2 Push the Connect button.
m
m
m
The Camera Dock light blinks green
while the connection to the computer is
active.
KODAK Picture Transfer Software
automatically opens on your computer
and your pictures are transferred.
Then, KODAK Picture Software opens
so you can work with your pictures on
your computer. For further details, see
Chapter 6, Using Pictures on Your
Computer.
49