Kodak Digital Science DC120 User Manual page 98

DC120 Camera
Problem
Ready light does not turn on
and the camera does not work.
Shutter button does not work.
Camera does not turn on.
Part of the picture is missing.
9-4
Cause
Batteries are low or
empty.
Camera is not turned
on.
Camera is not turned
on.
Ready light is
blinking. Camera is
processing picture.
The Status Display
reads FUL. The
camera memory or
optional Picture Card
is full.
Camera is connected
to the computer.
Batteries are not
properly installed.
Something was
blocking the lens
when the picture was
taken.
Your eye or the picture
was not centered
correctly in the
viewfinder
Solution
Replace the batteries.
Pictures remain in the
camera's memory
when the battery is
removed.
Turn the camera on
and verify that the
green Ready light
turns on.
Turn the camera on
and verify that the
green Ready light
turns on.
Wait until Ready light
stops blinking before
attempting to take
another picture.
Transfer pictures to
your computer and
erase them from the
camera's memory.
Disconnect camera
from computer.
Remove the batteries
and install them
according to the
directions on the
outside of the battery
door.
Keep hands, fingers,
or other objects away
from the lens when
taking pictures.
Leave space around
subject when
centering picture in
viewfinder.