Connecting The Devices - Hitachi CP-X8150 User Manual

Drawing function (continued)

Connecting the Devices

Connect the Hitachi Pen tablet or USB mouse to the USB TYPE A port on the
projector.
To save an image that has been drawn, a USB storage device must also be
connected to a USB TYPE A port of the projector.
If the projector only has one availabe USB TYPE A port, use a USB hub to
connect both devices.
In order to use the simple mouse function, connect the USB TYPE B port of the
projector with a USB (A) port of the computer with a USB cable.
USB storage device
NOTE
• Some USB storage devices and/or USB hubs may not operate properly.
• Before removing the USB storage device from the port of the projector, be
sure to use the REMOVE USB function on the Thumbnail screen to secure your
data (97). If you do not run the REMOVE USB function and remove the USB
storage device, the time stamp may not be recorded correctly.
USB mouse
Hitachi
Pen tablet
Example of connections
USB hub
Presentation tools
USB cable
105