Hitachi CP-X8150 User Manual page 23

Displaying the log (continued)
NOTE
• The Status Monitor and its backlight returns to the first state before
the FUNCTION or ENTER button was pressed when any button except cursor
buttons is pressed, or after about 30 seconds without button operation.
• The projector usage time is the total lamp time from the projector is
manufactured. It is not reset by using LAMP TIME in the OPTION menu (67).
• If the ▲/▼ buttons are pressed while the usage time is displayed, the usage
time switches to the past one when an error occurred.
 To display error history
Press the ▲ button to display previous error
log. If a warning has been displayed, the
first previous error log is the present error
currently occurring. The Status Monitor
displays the log number, occurred error, the
supplied voltage and peripheral temperature
at that time. Press the ► button to display
the usage time when each error occurred.
Use the ▲/▼ buttons to switch the log.
The display switches with the ◄/►
buttons at each log. Up to 10 error
logs including the present one can be
displayed.
NOTE
• The Status Monitor and its backlight returns to the first state before
the FUNCTION or ENTER button was pressed when any button except cursor
buttons is pressed, or after about 30 seconds without button operation.
• If no error or less than 10 errors have occurred, "NO DATA" is displayed in
spite of occurred error in the error log.
Status Monitor <Only for CP-X8160, CP-WX8255 and CP-WU8450>
Log number
1 P R E V I O U S
7 F I L T E R E R R O
A C 2 4 0 V 3 5 ° C
Error log (example)
Error log1
First display
Error log10
Error
Usage time
(error log1)
Usage time
(current)
Usage time
(error log10)
23