Table of Contents
Advertisement
Getting Started
SET UP YOUR START SCREEN
Adding an App
To add an app:
1 . Open the All Apps screen .
2 . Drag the top or bottom of
the screen inward, and an
option menu appears at the
bottom of the screen .
3 . Touch the icon named Customize
4 . Touch the app that you want to add to your Start screen .
The available options will appear in the right side of the
option menu .
5 . Click "Pin to Start"
screen .
Removing an App
To remove an app:
1 . In the Start screen or All Apps screen, drag the top or
bottom of the screen inward . An option menu is activated
at the bottom of your screen .
2 . Touch the icon named Customize
3 . Touch the app that you want to remove from the Start
screen . The available options will appear in the right side
of the option menu .
4 . Click "Unpin from Start"
screen .
38
or
in the menu .
to add the app to your Start
in the menu .
to remove it from the Start
WIRELESS LAN
Enabling Wireless Connection
To do this, do one of the following:
When the keyboard is attached,
n
press Fn+F1 to activate the
wireless networking function .
Open the Charms and select
n
Settings to open the Network
configuration page, and then
toggle the Airplane mode switch to Off .
To confirm that Airplane mode is disabled, go to the Desktop
and check the notification area . If you see an airplane icon
displayed on the lower right, then Airplane mode is on .
Otherwise, wireless function is enabled .
Connecting to a Wireless LAN
Once the wireless connection has been
enabled, the computer automatically
scans for available wireless networks
and displays them in the wireless LAN
network list . To connect to your desired
wireless network, click the network's
name in the list, and then click Connect .
Note: Some networks require a network security
key or password for connection. If necessary,
ask the network administrator or the Internet
service provider (ISP) for the required information.
Available in the U.S. only for the K-12.
39
Advertisement
Table of Contents
