Texcellent System Remote Control Box User Manual page 5

Remote Control User' s Manual
Special Notes
All rights reserved. No part of this manual may be reproduced or transmitted in any form
or by any means, electronic or manual, including photocopying and recording, for any
purpose without the express written permission of us.
Information in this document is subject to change without notice. We reserve the right to
change or improve our products or to make changes in the content without obligation to
notify any person or organization of such changes or improvements. The release of the
technical information does not constitute the granting of any license.
This document is for instructions to use the Texcellent
®
Texcellent Remote Control Box manual 2.2 presents detailed instructions to users on
how to communicate with the Texcellent
(1) When you want to use the Sigma3000
please make sure the sign is in Schedule status (display status). If the sign
is already in remote control status (you can see remote control list on the
LED sign), please press the " PROGRAM " key on the remote controller to
switch to Schedule status from remote control status; if the sign is in shut
down status, please set the sign back to schedule status by pressing the
" Shift +PROGRAM " button.
(2) If you use the remote controller to change the content of file "B" which was
received originally from the Sigma3000
©
Sigma3000 software to send file "B" to the LED sign, please change the file
name or change the display content and then send it to the LED sign,
otherwise, the LED sign will not display this file content even after your
sending it to the sign successfully.
For example, suppose you have just sent a file named "B" to the sign from
the Sigma3000© software and the display contents are "Welcome Name1
to U.S". And then you use the remote controller to change the display
contents to be "Welcome Name2 to U.S." but with the same file name "B".
One day or some time later, you want to use the Sigma3000© software to
send the original file B (its content being "Welcome Name1 to U.S") to the
LED sign. If you don't change the file name "B" to other file name, or if you
do not change the display contents, the sign will not display this file from the
©
Sigma3000 software.
®
Remote Control Box. The
®
indoor displays, manufactured in China.
©
software to send file to the sign,
©
software before, when you use the
1