Turning The Display On/Off; Setting The Time And Date - Texcellent System Remote Control Box User Manual

Remote Control User' s Manual
(capital and lowercase), number and punctuation can be used as a file name. There are
about 384 messages, which can be stored in the non-volatile memory, but only 128
messages can be added into each individual sequence (Play list).

3.2 Turning the Display ON/OFF

The displays power can be controlled in two ways:
1. Plugging the power supply into the display and the outlet, will automatically start
the sign. -or-
2. Automatic On, i.e., by using the remote control box. Follow the instructions in
Table 1: Use the Remote Control Box to Turn the Power ON/OFF. You can
specify which time you want the display to turn on and turn off.
Table 1: Using the Remote Control Box to Turn the Display Power ON/OFF Automatically
Step Function
1 Press "PROGRAM"
2 Press "DOWN" Arrow
until it gets to...
3 Press "ENTER"
4 Press "DOWN" Arrow
until it gets to...
5 Press "ENTER"
6 Press "UP" Arrow
until it gets to...
7 Press "ENTER"
8 Press "ENTER"
9 Press "ESC" until it gets
to the display mode

3.3 Setting the Time and Date

Display Will Read...
File Operation
Setup
Set Sequence
Power ON/OFF
Disabled
Enabled.. (if the "Enabled.." is showing
on the display, skip this step)
OFF TIME 00:00-Enter the time you want
the display to turn off
ON TIME 00:00- Enter the time you want
the display to turn on
13