Setting Messages With Specific Run Times - Texcellent System Remote Control Box User Manual

Remote Control User' s Manual
6 Press "ENTER" or "Y"
7 Press "ENTER"
8 Find the file Model you want
to add to the sequence and
Press "ENTER"
9 Find the file name you want to
add to the sequence and Press
"ENTER"
10 Press "SAVE&EXIT"

3.7 Setting Messages with Specific Run Times

After you have created a message, you can choose how long you would like that
message to run. For example, if you have a message that only needs to be displayed
during a lunch break you can specify for that message to run from 11:00 am to 13:00pm
(1:00p.m.) everyday. You can only specify the calendar days or days of the week in
which you would want the message to run if you have the Sigma3000
The time pattern is HH:MM. The first four digits represent the start time, while the last four
digits represent the finish time.
NOTE: The times are shown in military time (24 hour format).
1. Add Text
2. Add Picture
3. Add Array
4. Add FLW
Example: Text Model
1. Add Text
Example: D:\xxx
©
software.
19