Kodak CX6230 User Manual page 91

Problem
In Review mode,
you do not see a
picture (or the
expected picture)
on the camera
screen.
Picture is too
dark.
Picture is too
light.
Chapter 10
Cause
The camera may not be
accessing the correct
storage location.
Flash is not on.
The subject is too far
away for the flash to
have an effect.
The subject is in front
of a bright light
(backlit).
Not enough light.
The flash is not needed. Change to Auto flash or Flash Off
The subject was too
close for flash.
The light sensor is
covered.
Too much light.
Solution
Check the picture storage location
setting (page 12).
Turn on the flash
Move so there is no more than
12.8 ft (3.9 m) between the
camera and the subject.
Use Fill flash (page
your position so light is not
behind the subject.
Increase Exposure Compensation
(page 28).
(page 22).
Move so there is at least 1.6 ft (0.5
m) between camera and subject.
Hold the camera so your hands or
other objects do not cover the
light sensor.
Decrease Exposure Compensation
(page 28).
(page 22).
22) or change
79