Changing the Default Print Quantity
The Default Print Quantity setting determines the value that is displayed on the
Share Print screen
1
Press the Menu button.
2
Press
Turning Off Quickview
After you take a picture or video, Quickview displays it on the camera screen
for approximately 5 seconds (see
power, turn off Quickview.
1
Press the Menu button.
2
Press
3
Press
52
Chapter 6
(page
48). The default value is 1.
to highlight Setup Menu
3
Press
Quantity
4
Press
quantity, then press the OK button.
5
Press the Menu button to exit the menu.
This setting remains until you change it.
page 17
to highlight Setup Menu
to highlight Quickview
4
Press
OK button.
5
Press the Menu button to exit the menu.
The picture is not displayed on the
camera screen after you take it. To see the
picture or video, press the Review button.
This setting remains until you change it.
, then press the OK button.
to highlight Default Print
, then press the OK button.
to select the new default
and
page
32). To save battery
, then press the OK button.
, then press the OK button.
to highlight Off, then press the