Changing The Print Quantity Default; Turning Off Quickview - Kodak EASYSHARE LS443 User Manual

Changing the Print Quantity Default

The Default Print Quantity setting determines the value that is displayed on the
Share Print screen
1 Press the Menu button.
2
Move the joystick
3
Move the joystick
press the OK button.

Turning Off Quickview

After you take a picture or video, Quickview displays it on the LCD for
approximately 5 seconds (see
turn off Quickview.
1 Press the Menu button.
2
Move the joystick
3
Move the joystick to highlight Quickview
56
Chapter 6
(page 52). The default value is 1.
to highlight Setup
to highlight Default Print Quantity
4
Move the joystick
default quantity, then press the OK button.
5
Press the Menu button to exit the menu.
This setting remains until you change it.
page 19
to highlight Setup
4 Move the joystick to highlight Off, then press
the OK button.
5 Press the Menu button to exit the menu.
The picture is not displayed on the LCD
after you take it. To see the picture or
video, press the Review button. This
setting remains until you change it.
, then press the OK button.
and page 38). To save battery power,
, then press the OK button.
, then press the OK button.
, then
to select the new