Running A Slide Show - Kodak EASYSHARE CX4210 User Manual

Running a Slide Show

Use the Slide Show to display your pictures on the LCD in the order in which
you took them. To run a slide show on a television or other external device, see
page 30.
Starting the Slide Show
1
Press the Review button, then press the Menu button.
2 Highlight Slide Show
4
To cancel the Slide Show, press the OK button.
NOTE: If you connect or disconnect the video cable while a slide show is
running, the slide show stops.
Changing the Display Interval
The default setting displays each picture for 5 seconds. You can increase the
display interval to up to 60 seconds.
The Interval setting remains until you change it.
Chapter 3
, then press the OK button.
3
Highlight Begin Show, then press the OK
button.
The pictures are each displayed once in
the order in which you took them. Then
the camera returns to the Menu screen.
See Turning On Loop, page
continual display.
1
On the Slide Show menu, highlight Interval,
then press the OK button.
2 Press
To scroll through the seconds quickly, press
and hold
3
Press the OK button.
30, for
to select a display interval.
.
29