Attaching The Wrist Strap; Loading The Batteries - Kodak EASYSHARE CX4210 User Manual

Attaching the Wrist Strap

Loading the Batteries

Two KODAK Digital Camera Batteries or one KODAK CRV3 Lithium Battery is
included with your camera.*
or
IMPORTANT BATTERY INFORMATION
For acceptable battery life and to make sure your camera operates
dependably, do not use alkaline batteries.
See page 83 for the types of batteries you can use in your camera.
* If your camera was packaged with a KODAK EASYSHARE Camera Dock II, see
page 52 for details on using the KODAK EASYSHARE Ni-MH Rechargeable
Battery Pack.
4
Chapter 1
1 Thread the short loop of the strap through
the wrist strap post.
2
Thread the long end of the strap through the
short loop. Pull until secure.
1 Turn off the camera.
2
On the bottom of the camera, slide the
battery door and lift to open.
3
Insert two KODAK Digital Camera Batteries,
AA, or KODAK CRV3 battery, as shown.
4 Close the battery door.