Seat Belt Warning Light/Beep - Mazda Automobile Owner's Manual

Ofrecido por www.electromanuales.com
WARNING
Using an Extender That is Too Long:
Using an extender that is too long is
dangerous. The seat belt will not fit
properly. In an accident, the seat belt
will not provide adequate protection
and you could be seriously injured.
Don't use the extender or choose one
shorter in length if the distance
between the extender's buckle and the
center of the user's body is less than
15cm (6 in).
NOTE
When not in use, remove the seat belt
extender and store it in the vehicle. If
the seat belt extender is left connected,
the seat belt warning light will not
illuminate and function properly.
Seat Belt Systems
Seat Belt Warning Light/
Beep
The seat belt warning light illuminates
and a beep sound will be heard if the
driver's seat belt is not fastened when the
ignition switch is turned to the ON
position.
Conditions of operation
Condition
The driver's seat belt is not
fastened when the ignition
switch is turned to the ON
position.
The driver's seat belt is
fastened while the warning
light and the beep sound are
activated.
The driver's seat belt is
fastened before the ignition
switch is turned to the ON
position.
Essential Safety Equipment
Result
The warning light
illuminates for about 1
minute and a beep
sound will be heard
for about 6 seconds.
The warning light
turns off and the beep
sound stops.
The warning light will
not illuminate and the
beep sound will not be
heard.
2-19