Kodak EASYSHARE CX4200 User Manual page 68

Camera
Problem
Camera freezes up
when a card is
inserted or
removed.
Picture is too light. The flash is not needed. Change to Auto flash
Stored pictures are
damaged.
Pictures remaining
number does not
decrease after
taking a picture.
60
Chapter 9
Cause
Camera detects an error
when the card was
inserted or removed.
The subject was too
close when the flash was
used.
Lighting condition is too
bright.
The card was removed
when the ready light was
blinking.
Picture does not take up
sufficient space to
decrease the picture
remaining number.
Solution
Turn the camera off, then
back on. Make sure the
camera is turned off before
inserting or removing a
card.
(page 16).
Move so there is at least 1.6
ft (0.5 m) between the
camera and the subject.
Decrease exposure
compensation (page
Make sure the ready light is
not blinking before
removing the card.
The camera is operating
normally. Continue taking
pictures.
21).