Connecting To The Computer; Important-Before You Connect - Kodak EASYSHARE CX4200 User Manual

7

Connecting to the Computer

Important—Before You Connect
Install the software from the KODAK EASYSHARE Software CD BEFORE you
connect the camera or Camera Dock to the computer.
Connecting to the Computer
You can transfer your pictures from the camera to the computer using either
the camera alone or the optional KODAK EASYSHARE Camera Dock or Camera
Dock II. See page 51
Connecting With the USB Cable
NOTE: You can also use a KODAK SD Multimedia Card Reader-Writer to
transfer your pictures. See your KODAK retail dealer or visit our Web
site at http://www.kodak.com/go/cx4200accessories.
for connecting with a Camera Dock.
1
Turn off the camera.
2
Plug the labeled ( ) end of the USB cable
into the labeled USB port on your computer.
See your computer User's Guide for details.
3
Plug the other end of the USB cable into the
labeled USB port on the camera.
An optional AC adapter is available for
your camera; it saves battery power when
transferring pictures (see page 84).
47