Toshiba SD-V394SC Owner's Manual page 19

S-video output
An S-Video connection is superior to Video (Yellow) output. Use this method for DVD playback when the connected television has S-
Video input, and does not have component video inputs.
Component video outputs
PROGRESSIVE outputs
Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video
signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker.
INTERLACED outputs
Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy the highest quality
DVD picture playback.
Notes:
• To switch the scan mode between the interlace and progressive modes,
• In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case,
adjust the TV or monitor for optimum performance.
Connecting to an audio system and TV equipped with S-video input/component video inputs
The S-video output and component video output transports the DVD-video signal exclusively and will deliver enhanced DVD
video picture performance.
Signal flow
Notes:
• Refer to the owner's manual of the connected equipment as well.
• When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• If you place the DVD/VCR near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD/
VCR away from the tuner and radio.
• The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD/VCR's power cord. If you leave the amplifier power on, the
speakers may be damaged.
• When connecting to a TV using the S-video jack, make sure that the Progressive indicator "
window is not lit. If it is lit, the S-video outputs do not feed the correct signals and you cannot see any picture. To
turn off the Progressive indicator, select Interlaced output
2I30301A-En_p18-25
Downloaded From Disc-Player.com Toshiba Manuals
To S-VIDEO
OUT
To wall outlet
• Actual labels for
To P
R
component video
VIDEO
inputs may vary
OUT
depending on the
TV manufacturer
(ex. Y, R-Y, B-Y or
Y, CB, CR).
Component
video cable
(not supplied)
To P
S-video cable (not supplied)
19
see page
63
To ANALOG
AUDIO OUT
(white)
(red)
/C To P /C To Y
R B B
VIDEO VIDEO
OUT OUT
Audio cable (not supplied)
To Y video input
To P C video input
B/ B
C video input
R/ R
To S-video input
TV or monitor with
component video inputs
63 .
.
If you connect the DVD/VCR to
your TV with the DVD OUT jacks,
select the corresponding video
input on your television to watch
DVD video discs.
To audio inputs of
the amplifier
(red)
Audio system
" on the display
1/12/06, 17:43
(white)
19