Daewoo DVG-4000S Owner's Manual page 37

DVG-4000S(GB)-DECA 02.2.4 9:48 AM ˘ ` 36
FUNCTION SETTING (Continued)
TV TYPE
You may select according to the colour
system of the TV to be connected.
¥ Select "AUTO" for a multi-system TV.
¥ Select "NTSC" for a NTSC TV.
¥ Select "PAL" for a PAL TV.
PIC MODE
¥ Select "AUTO" for automatically setup.
¥ Select "HI-RES" for high-resolution picture.
¥ Select "N-FLICKER" for no flicker picture.
ANGLE MARK
This only works when there is an angle
mark on the disc.
¥ Select "ON",the screen shows the mark
when playing a DVD.
¥ Select "OFF",the mark is not shown .
OSD LANGUAGE
¥ ENGLISH
The OSD is in English.
¥ FRENCH
The OSD is in French.
¥ SPANISH
The OSD is in Spanish.
• 36 •
Downloaded From Disc-Player.com Daewoo Manuals
AUDIO OUT
¥
ANALOG: No signal is output from the
coaxial port.
¥
SPDIF/RAW: Select this when the DVD
player is connected with a power amplifier
through coaxial port, refer to page 17.
When a Dolby Digital DVD, DTS DVD or
MPEG DVD is played, the coaxial port
will output in the corresponding
digital(Source code) format. The power
amplifier to be connected must have Dolby
Digital, DTS and MPEG decoding.
¥
SPDIF/PCM: Select this when the DVD
player is connected with a 2-channel
digital mode or stereo amplifier (refer to
page 17 for the connection). When a Dolby
Digital or MPEG DVD is played, the
coaxial port will output in PCM 2-channel
format.
Notes:
In case of selecting SPDIF/RAW or
SPDIF/PCM, no signal is output from the
audio analog output.
CAPTIONS
CAPTION was invented for hearing
impaired person. But it is very useful when
learning foreign languages. If your TV
supports closed caption, select ON. If not,
closed caption wonÕt be displayed.
¥ ON
The hidden subtitle is shown.
¥ OFF
The hidden subtitle is turned off.
SCREEN SAVER
Start the screen saver, the screen saver
image appears when the unit stops or
the image is frozen for a few minutes.
This saver can keep the screen from
being damaged.
¥ ON: Start the screen saver.
¥ OFF: Remove the screen saver.