Kodak EasyShare ZD710 User Manual page 58

Troubleshooting
If
Picture orientation is
not accurate
Flash does not fire
Storage location is
almost or entirely full
Battery life is short
You cannot take a
picture
Error message appears
on EVF/LCD
52
Downloaded From camera-usermanual.com Kodak Manuals
Try one or more of the following
■
Set the Orientation Sensor to ON
■
Open the flash unit.
■
Check the flash setting and change as needed
NOTE: The flash does not fire in all modes.
■
Transfer pictures to the computer
■
Delete pictures from the card
■
Change image storage location to internal memory
page 33).
■
Make sure the correct battery type is installed
■
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■
Insert a new or charged battery
■
Turn camera off, then on again. Make sure the camera is not in
Favorites mode. If prompted, set language and date/time.
■
Press Shutter button all the way
■
Insert a new or charged battery
■
Wait until the AF/AE indicator turns green before attempting to
take another picture.
■
Memory full. Transfer pictures to the computer
delete pictures (see page
(see page 33), or insert another card.
■
Follow the EVF/LCD prompts.
■
Turn the camera off, then on again.
■
Remove memory card from the camera.
■
Remove the battery and wipe the contacts with a clean, dry cloth.
■
Insert a new or charged battery
■
Get customer support help
(see page 34)
(see page 47).
(see page 16) or insert a new card.
(see page
(see page 2).
(see page 5).
(see page 2).
16), change image storage location
(see page 2).
(see page 56).
www.kodak.com/go/support
(see page 9).
(see
62).
(see page 47),