Sony SRG-300SE Technical Manual page 24

Execution Command List (3/4)
Command Set Command
CAM_ICR On
Off
CAM_AutoICR On
Off
Threshold
CAM_Stabilizer On
Off
CAM_Memory Reset
Set
Recall
CAM_IDWrite —
CAM_ChromaSuppress —
CAM_ColorGain Direct
CAM_ColorHue Direct
SYS_Menu Off
Information Display On
Off
Pan-tiltDrive Up
3)
Down
Left
3)
Right
UpLeft
UpRight
DownLeft
DownRight
Stop
3)
AbsolutePosition
RelativePosition
Home
Reset
Command Packet
8x 01 04 01 02 FF
8x 01 04 01 03 FF
8x 01 04 51 02 FF
8x 01 04 51 03 FF
8x 01 04 21 00 00 0p 0q FF
8x 01 04 34 02 FF
8x 01 04 34 03 FF
8x 01 04 3F 00 0p FF
8x 01 04 3F 01 0p FF
8x 01 04 3F 02 0p FF
8x 01 04 22 0p 0q 0r 0s FF
8x 01 04 5F pp FF
8x 01 04 49 00 00 0p 0q FF
8x 01 04 4F 00 00 0p 0q FF
8x 01 06 06 03 FF
8x 01 7E 01 18 02 FF
8x 01 7E 01 18 03 FF
8x 01 06 01 VV WW 03 01 FF
8x 01 06 01 VV WW 03 02 FF
3)
8x 01 06 01 VV WW 01 03 FF
8x 01 06 01 VV WW 02 03 FF
3)
8x 01 06 01 VV WW 01 01 FF
3)
8x 01 06 01 VV WW 02 01 FF
3)
8x 01 06 01 VV WW 01 02 FF
3)
8x 01 06 01 VV WW 02 02 FF
3)
8x 01 06 01 VV WW 03 03 FF
8x 01 06 02 VV WW
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
8x 01 06 03 VV WW
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
8x 01 06 04 FF
8x 01 06 05 FF
Comments
Infrared Mode ON/OFF
Auto Infrared mode ON/OFF
pq: ICR ONOFF threshold level
Stabilizer ON/OFF
p: Memory number (=0 to F)
pqrs: Camera ID (=0000 to FFFF)
pp: Chroma Suppress setting level
00: OFF
1 to 3: ON (3 levels).
Effect increases as the level number increases.
p: Color specification
q: Gain setting level
The range of p is from 0 to 6.
0 : master, 1 : magenta, 2 : red, 3 : yellow, 4 : green,
5 : cyan, 6 : blue
The range of q is from 0 to E.
The initial value is 4. Gain Up with 5 or more, Gain
Down with 3 or less.
p: Color specification
q: Phase setting level
The range of p is from 0 to 6.
0 : master, 1 : magenta, 2 : red, 3 : yellow, 4 : green,
5 : cyan, 6 : blue
The q is setting level of phase and the range is from 0 to
E.
The initial value is 7. Phase (+ direction) with 8 or more,
Phase (- direction) with 6 or less.
Erasing menu display
Operation status screen display ON/OFF of One Push
Trigger for CAM_Memor and CAM_WB
VV: Pan speed setting 0x01 (low speed) to 0x18
(high speed)
WW: Tilt speed setting 0x01 (low speed) to 0x17
(high speed)
YYYY: Pan Position DE00 to 2200 (CENTER 0000)
ZZZZ: Tilt Position FC00 to 1200
(Image Flip: OFF) (CENTER 0000)
Tilt Position EE00 to 0400
(Image Flip: ON) (CENTER 0000)
Command List