Advertisement
Quick Links
Advertisement
Related Manuals for EAT Forte S
Summary of Contents for EAT Forte S
- Page 1 EuroAudioteam, s.r.o. INSTRUCTIONS FOR USE EAT Forte S...
- Page 2 Dear Music Lover, Welcome! Congratulations on your purchase of our EAT Forte S turntable. Your EAT Forte S was hand-crafted by our team of skilled technicians. It has been tested rigorously and is ready for your enjoyment. Please take the time to read this manual carefully, to ensure that you obtain the ultimate performance from your EAT Forte S turntable.
- Page 3 EAT Forte Controls, features and connections Main turntable chassis Platter 2x Drive belt Speed control Arm board and Spirit level 4 x Adjustable feet Record weight * Grounding cable (not shown) * Power supply (not shown) * Gloves (not shown)*...
- Page 4 Set-up For safe and trouble-free installation, we would suggest that you assemble the unit with the assistance of a friend, due to the weight of the complete turntable system. 1) Open the shipping crate by unscrewing the top of the crate. Remove the wooden top. 2) Remove the styrofoam top layer, with the accessories.
- Page 5 If the player is not used over a long period of time, the drive belt can be removed to prevent undesired stretching. As a safety precaution, always disconnect the record player from the mains power supply before maintenance! Technical specifications EAT Forte S * Electronic speed change * 33.33/* 45.11 Speed variance ±0.09%...
- Page 6 Pro-Ject 12CC Evolution Tonearm Headshell with finger lift Tonearm tube Tonearm rest and removable transport lock Tonearm lift lever Anti-skating weight * Anti-skating weight wire support Tonearm counterweight * 7a Downforce scale Anti-skating weight adjustment scale Tonearm base Cartridge downforce adjustment (Pro-Ject Evolution tonearms) Remove the transport lock (3) from the tonearm.
- Page 7 Adjusting the azimuth (Pro-Ject Evolution tonearms) The cartridge stylus must be vertical in the record groove in order to trace the groove wall modulations correctly. Screw A small screw at the bearing end of the arm allows incorrect azimuth to be corrected if your stylus is not mounted exactly perpendicular to the cartridge body (which is often the case).
- Page 8 Ortofon RS tonearms Detachable headshell with finger lift Tonearm tube Tonearm rest and removable transport lock Tonearm lift lever Anti-skating force adjustment knob Downforce adjustment knob Tonearm counterweight with securing screw* Tonearm base Stylus pressure gauge (not shown) * Cartridge downforce adjustment (Ortofon RS-Tonearm) Remove the transport lock (3) from the tonearm.
- Page 9 If it is not, loosen the hexagon screw in the tonearm base (8 RS tonearms or 7 AS tonearms) just enough to allow vertical movement of the arm pillar without force and slide the arm up or down until it is parallel. Carefully retighten the hexagon screw without applying excessive force (which would deform the arm pillar) –...
- Page 10 Modification or change to any part of the product by unauthorised persons release the manufacturer from any liability over and above the lawful rights of the customer. The information was correct at the time of EAT EuroAudioTeam is a Registered going to press. The manufacturer reserves the Trademark of Jozefina Lichtenegger.
Need help?
Do you have a question about the Forte S and is the answer not in the manual?
Questions and answers