Setup Overview - Iomega px6-300d User Manual

Setting up Your px6-300d Network Storage

Setup Overview

It's easy to set up your px6-300d Network Storage:
Remove it from the box, connect it to your network switch or hub, and then power it up.
●
Launch a web browser and either enter the Setup URL, http://setup.lenovoemc.com, or use the
●
device IP address or model name to access the device directly.
Device Setup launches automatically the first time you access your device and guides you
●
through selecting the configuration options that best meet your needs.
Refer to the following sections for information on the device components and connection instructions.
About the px6-300d Components
Connecting the px6-300d to Your Network
Safety Information
Accessing Your Device If It Is Not Discovered
By default, the px6-300d will attempt to acquire an IP address from DHCP, If there is not a DHCP
server available on the network, the px6-300d will use an IP address in the self-assigned APIPA
range (169.254.x.x).
2 Setup Overview