Samsung Refrigerator User Manual page 5

overloading house wiring
circuits, which could cause a
fi re hazard from overheated
wires.
• Make sure that the power plug
is not squashed or damaged by
the back of the refrigerator.
• Do not bend the power cord
excessively or place heavy
articles on it.
- This constitutes a fi re hazard.
• Have the power cord repaired
or replaced immediately by
the manufacturer or its service
agent if power cord has
become frayed or damaged.
• Do not use a cord that shows
cracks or abrasion damage
along its length or at either end.
• If the power cord is damaged,
have it replaced immediately by
the manufacturer or its service
agent.
• When moving the refrigerator,
be careful not to roll over or
damage the power cord.
• Do not insert the power plug
with wet hands.
• Unplug the refrigerator before
cleaning and making repairs.
• Do not use a wet or damp cloth
when cleaning the plug.
• Remove any foreign matter or
dust from the power plug pins.
- Otherwise there is a risk of fi re.
• If the refrigerator is
disconnected from the power
supply, you should wait for
at least ten minutes before
plugging it back.
• If the wall socket is loose, do
not insert the power plug.
- There is a risk of electric shock
or fi re.
• The appliance must be
positioned so that the plug is
accessible after installation.
• The refrigerator must be
grounded.
- You must ground the
refrigerator to prevent
any power leakages or
electric shocks caused
by current leakage from
the refrigerator.
• Never use gas pipes,
telephone lines or other
potential lightening rods
as ground.
- Improper use of the ground
plug can result in electric shock.
• Do not dissemble or repair the
refrigerator by yourself.
- You run risk of causing a fi re,
malfunction and/or personal
injury.
• If you smell pharmaceutical or
smoke, pull out power plug
immediately and contact your
Samsung electronics service
safety information _05