Installing The Global Positioning System (Gps) Module; Removing The Ush Daughter Board - Dell Latitude 14 Rugged Extreme 7404 Owner's Manual

Hide thumbs Also See for Latitude 14 Rugged Extreme 7404:
Table of Contents

Advertisement

3.
To remove the GPS module:
a. Disconnect the GPS antenna cable from the module. [1]
b. Release the GPS module from its connector to the system board. [2]
c. Pry the GPS module retention latch upwards and remove the GPS module from the computer. [3]
[4]

Installing the Global Positioning System (GPS) Module

1.
Insert the GPS module into its slot and align it with the connector to the system board.
2.
Connect the GPS module antenna cable.
3.
Install:
a.
bottom cover
b.
battery
4.
Follow the procedures in

Removing the USH Daughter Board

1.
Follow the procedures in
2.
Remove:
a.
battery
b.
bottom cover
c.
hard drive
d.
ExpressCard
After Working Inside Your
Before Working Inside Your
computer.
Computer.
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Latitude 14 rugged extreme

Table of Contents