Table Of Contents; General Operation; Slope Operation - Toro 20339 Operator's Manual

Contents
Introduction .................................................................. 1
General Operation .................................................. 2
Slope Operation ...................................................... 2
Children................................................................. 3
Service ................................................................... 3
Safety and Instructional Decals ................................. 4
Setup ............................................................................ 5
1 Unfolding the Handle............................................ 5
2 Installing the Recoil-starter Rope in the Rope
Guide................................................................. 5
3 Filling the Engine with Oil...................................... 5
Product Overview .......................................................... 7
Operation ..................................................................... 7
Filling the Fuel Tank ................................................ 7
Checking the Engine-oil Level................................... 8
Adjusting the Cutting Height .................................... 8
Starting the Engine .................................................. 9
Using the Self-propel Drive....................................... 9
Stopping the Engine ................................................ 9
Recycling the Clippings ............................................ 9
Bagging the Clippings .............................................10
Side-discharging the Clippings..................................10
Storing the Machine in the Vertical-stow
Position .............................................................11
Operating Tips ......................................................12
Maintenance .................................................................13
Recommended Maintenance Schedule(s) ......................13
Preparing for Maintenance.......................................13
Replacing the Air Filter............................................13
Changing the Engine Oil .........................................14
Replacing the Blade ................................................15
Cleaning the Machine..............................................15
Storage ........................................................................16
Preparing the Machine for Storage ............................16
Folding the Handle .................................................16
Removing the Machine from Storage.........................17
Safety
This lawn mower meets or exceeds the CPSC blade safety
requirements for walk-behind rotary lawn mowers.
Read and understand the contents of this manual before
you start the engine.
The safety alert symbol (Figure 2) is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Improperly using or maintaining this mower could result in
injury or death. To reduce this potential, comply with the
following safety instructions.
The following instructions have been adapted from the
ANSI/OPEI standard B71.1-2012.
This cutting machine is capable of amputating hands
and feet and of throwing objects. Failure to observe
the following safety instructions could result in serious
injury or death.

General Operation

•
Read, understand, and follow all instructions on the
machine and in the manual(s) before starting.
•
Do not put hands or feet near or under the machine.
Keep clear of the discharge opening at all times.
•
Allow only responsible adults, who are familiar with the
instructions, to operate this machine.
•
Clear the area of objects such as rocks, wire, toys, etc.,
which could be thrown by the blade. Stay behind the
handle when the engine is running.
•
Be sure the area is clear of bystanders before operating.
Stop machine if anyone enters the area.
•
Do not operate machine barefooted or while wearing
sandals. Always wear substantial footwear.
•
Do not pull machine backward unless absolutely
necessary. Always look down and behind before and
while moving backward.
•
Never direct discharged material toward anyone. Avoid
discharging material against a wall or obstruction.
Material may ricochet back toward the operator. Stop the
blade when crossing gravel surfaces.
•
Do not operate the machine without the entire grass
catcher, discharge guard, rear guard, or other safety
protective devices in place and working.
•
Never leave a running machine unattended.
•
Stop the engine and wait until the blade comes to a
complete stop before cleaning the machine, removing
grass catcher, or unclogging the discharge guard.
•
Operate machine only in daylight or good artificial light.
•
Do not operate machine while under the influence of
alcohol or drugs.
•
Never operate the mower in wet grass. Always be sure of
your footing; walk; never run.
•
Disengage the drive system, if so equipped, before
starting the engine.
•
If the machine should start to vibrate abnormally, stop
the engine and check for the cause immediately. Vibration
is generally a warning of trouble.
•
Always wear eye protection when operating the machine.
•
Lightning can cause severe injury or death. If you see
lightning or hear thunder in the area, do not operate the
machine; seek shelter.
•
See the manufacturer's instructions for proper operation
and installation of accessories. Use only accessories
approved by the manufacturer.

Slope Operation

Slopes are a major factor related to slip-and-fall accidents,
which can result in severe injury. Operation on all slopes
2