HTC 950 RX Manual page 22

Htc 950 rx concrete floor grinders
Hide thumbs Also See for 950 RX:
Table of Contents

Advertisement

Machine description
9.
10.
11.
Take the radio control unit to a safe place when the "L" appears in the display
and switch off the unit. Install two charged AA batteries 1.2 V NiMH, or
alternatively two normal, non-rechargeable 1.5 V AA. For instruction on
charging/replacement, see
batteries, page 
14
OFFSET (L - R)  - Turn the control to the left (L) or the right (R) to adjust for
any tendency to veer.
Start of radio communication - Button to start the radio communication
between the radio control unit and the machine's receiver. It is used together
with the EM-STOP button.
Display/Channel Info - Two points blink alternately with a red light, when the
radio control unit is activated. The displays also shows information on the
radio channel and any error messages. The letter "L" appears and blinks
rapidly, when the batteries need to be recharged/replaced. The radio control
unit functions for about 30 min after the "L" appears for the first time.
under Charging/replacing the radio control unit's
33.
HTC 950 RX
1.0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

420 vs

Table of Contents