Operation; Switching On And Off; Standby Mode - Patriot SolarGuard 155 User Manual

Operation

Switching on and off

1 To switch on, press and hold
2 To switch off, press and hold
Pulse indicator light
The pulse indicator light indicates the output pulse speed. The pulse speed varies according to the battery charge level:
Battery charge level
Normal
Low

Standby mode

An intelligent battery management feature puts the unit into Standby mode when battery charge falls below a 'safe
operating level'. When in Standby mode, the unit is still on, but it will not deliver a pulse to the electric fence.
The unit will resume delivering pulses when the solar panel has charged the battery so that it is above 'safe operating
level'.
When operation resumes, the battery charge level will still be low, so the unit will deliver one pulse every 3 seconds.
Once the battery reaches normal charge level, the pulse will revert to one pulse every 1.5 seconds.
until the pulse indicator light gives one long flash (one second).
until the pulse indicator light gives five short flashes.
Typical pulse speed
A pulse every 1.5 seconds
A pulse every 3 seconds
9