Before Requesting Help - Panasonic KX-TC1713CB Operating Instructions Manual

PQQX13142ZA-AK-5 01.7.18 8:58 AM y [ W 62

Before Requesting Help

Problem
The unit does not work.
"No link to base
Place on cradle and
try again." is displayed
and an alarm tone sounds.
Static, sound cuts in/out,
fades. Interference from
other electrical units.
The handset and/or the base
unit do not ring.
The handset display is
blank.
The handset display is still
blank after pressing
(‹) CH (fi) EDIT (fl)
, or
62
Cause and Remedy
≥Check the settings (p. 11–16).
≥Charge the battery fully (p. 12).
≥Clean the charge contacts and charge
again (p. 13).
≥Install the battery properly (p. 61).
≥Place the handset on the base unit and
unplug the AC adaptor to reset. Plug in,
and try again.
≥You are too far from the base unit.
Move closer and try again.
≥Place the handset on the base unit and
try again.
≥Plug in the AC adaptor.
≥Raise the base unit antenna.
≥Locate the handset and the base unit
away from other electrical appliances
(p. 3).
≥Move closer to the base unit.
≥Raise the base unit antenna.
CH (fi)
≥Press
channel in the talk, speakerphone or
intercom mode.
≥The ringer volume is set to OFF. Set to
HIGH or LOW (p. 19).
≥The handset is in the standby mode
(p. 13). Press
(fl)
to turn the display on.
≥Charge the battery fully (p. 12).
(›)
,
.
to select a clearer
(›) (‹) CH (fi)
, , or
EDIT