Page 1
Order toll-free in the U.S. : Call 877-877-BBOX ( outside U.S. call 724-746-5500 ) CUSTOMER Free technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax SUPPORT 724-746-0746 INFORMATION Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com...
Express Ethernet Switch : LB9017A-R4 FCC Statement The FCC (Federal Communications Commission) restricts the amount of radio frequency emission and radiation coming from computer equipment. The equipment introduced in this manual has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules.
Express Ethernet Switch : LB9017A-R4 Preface This manual describes how to install and use the 16 Ports Smart Ethernet Switch. The TX ports of the switch introduced here auto- negotiates the presence of 10/100Mbps and full/half-duplex mode and auto-MDIX. In addition, it allows an optional 100BaseFX multi-mode or single-mode fiber module, enabling long distance connection.
Express Ethernet Switch : LB9017A-R4 Product Overview Front View Figure 1: 16 Ports Smart Ethernet Switch Package Contents When you unpack the product package, you shall find these items listed below. The 16 Ports Switch One AC power cord User’s Manual Please inspect the contents, and report any apparent damage or missing items immediately to your authorized reseller.
Express Ethernet Switch : LB9017A-R4 Product Features ♦ P 16 × 10/100M RJ-45 ROVIDES PORTS USING CONNECTORS ♦ A N OPTIONAL SINGLE PORT FIBER MODULE ALLOWS - 100B SC, ST, MT-RJ, VF-45 MULTI MODE FIBER WITH CONNECTOR - 100B SINGLE...
Express Ethernet Switch : LB9017A-R4 Front Panel Display The LED indicators on the front panel provide you with instant feedback on each port status, and help you monitor and troubleshoot the switch. Figure 2: Front Panel LEDs Power This LED comes on when the switch is properly connected to power and turned on.
Express Ethernet Switch : LB9017A-R4 Physical Ports The 16 Ports Switch has sixteen 10/100Mbps ports using RJ-45 connectors and provides one slot for the optional single-port fiber module. The optional module allows fiber type (multi-mode, single-mode, or WDM single-mode fiber) and connector (SC, ST, MT-RJ, VF-45, or LC) at user’s discretion.
Express Ethernet Switch : LB9017A-R4 Installation Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select...
Express Ethernet Switch : LB9017A-R4 Installation and Placement Instructions OUNTED TO INCH STANDARD RACK Locate the accessories supplied in the product package. Use the rackmount brackets and screws to install the switch into any EIA 19” standard rack. Step 1: Attach the brackets to each side of the chassis.
Express Ethernet Switch : LB9017A-R4 Optional Fiber Module Installation Consult the following illustrations before installation. Step 1: Make sure the power is switched off. The module is not hot- swappable. It may cause electric shock or any possible damage to the switch if the power is not switched off.
Express Ethernet Switch : LB9017A-R4 Connecting to Power Locate the supplied AC power cord. Step 1: Connect the AC power cord to the receptacle at the back of the switch. Step 2: Attach the plug into a standard AC outlet with a voltage range from 100~240VAC.
Express Ethernet Switch : LB9017A-R4 ETWORK EGMENTATION The maximum segment distance between a node and a directly connected switch port on a 100BaseFX network is 120km using 10/125 (or 9/125) µm single-mode fiber optic cable. It is capable of a maximum span of 2km when 62.5/125 (or 50/125) µm multi- mode fiber optic cable is used.
Express Ethernet Switch : LB9017A-R4 Switch Configuration Setting up Web-Based Browser Interface The Ethernet Switch provides a browser interface that lets you configure and manage the Ethernet Switch from a Web browser (such as Microsoft Internet Explorer or Netscape Navigator) remotely.
Express Ethernet Switch : LB9017A-R4 Enter the factory default User Login ID: admin. ASSWORD Enter the factory default password (no password, press <Enter> directly). Otherwise, enter a user-defined password if you follow the instructions later and change the factory default password.
Express Ethernet Switch : LB9017A-R4 YSTEM HANGE The System Change parameters can be displayed by clicking the System Change selection in the left sub-menu. Switch Name: Type a switch name for this Ethernet Switch. New Password: Enter a user-defined password and change the factory default password.
Express Ethernet Switch : LB9017A-R4 IP C ONFIGURATION The IP Configuration parameters can be displayed by clicking the IP Configuration selection in the left sub-menu. IP Address, Netmask, Default Gateway: You can see and change the IP Address, Netmask, and Default Gateway of the Ethernet Switch.
Express Ethernet Switch : LB9017A-R4 The Port parameters can be displayed by clicking the Port selection in the left sub-menu. Port No.: Choose Port No. 01 ~ 17. Auto Nway: Choose Enable or Disable to enable or disable Auto Nway of the ports.
Express Ethernet Switch : LB9017A-R4 Update: Click the Update button and apply the new settings of the ports. VLAN The VLAN parameters can be displayed by clicking the VLAN selection in the left sub-menu. Group No: Click and choose the VLAN Group No 01 ~ Member Port: Click and choose the Member Port 01 ~ 17 to be added into the VLAN Group No 01 ~ 08.
Express Ethernet Switch : LB9017A-R4 RUNKING The Trunking parameters can be displayed by clicking the Trunking selection in the left sub-menu. Trunk Hash Algorithm Selection: Click and choose Port ID, SA, DA, or SA & DA Trunk Hash Algorithm. Trunk0: Click and choose Port1 ~ Port4 to be added into the Trunk0.
Express Ethernet Switch : LB9017A-R4 The QoS Mode parameters can be displayed by clicking the QoS Mode selection in the left sub-menu. Click and choose First-In-First-Service, All-High- before-Low, or Weight-Round-Robin Priority Mode. The Priority Mode will be treated as “8” when both Low weight and High weight of Weight-Round- Robin are set to “0”.
Express Ethernet Switch : LB9017A-R4 RIORITY The QoS Priority parameters can be displayed by clicking the QoS Priority selection in the left sub-menu. Click and choose Port Base, VLAN Tag, and/or IP / DS for Port No 1 ~ 17.
Express Ethernet Switch : LB9017A-R4 EFAULT The Load Default parameters can be displayed by clicking the Load Default selection in the left sub-menu. Click the Load button to load the default settings. Once the Load button is selected, all last saved Port, VLAN, Trunking, QoS Mode and QoS Priority settings will be reverted back to the default settings.
Express Ethernet Switch : LB9017A-R4 IRMWARE PDATE The Firmware Update parameters can be displayed by clicking the Firmware Update selection in the left sub-menu. Click the Firmware Update button to update firmware to the switch. The TFTP protocol is used to upload firmware to the switch.
Express Ethernet Switch : LB9017A-R4 Connector Pinouts Pin arrangement of RJ-45 connectors: Figure 4: RJ-45 Connector and Cable Pins The following table lists the pinout of 10/100BaseT/TX ports. Connector Pin-Out Regular Ports Uplink port Input Receive Data + Output Transmit Data +...