Table of Contents
Advertisement
Quick Links
Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX
CUSTOMER
FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
SUPPORT
Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
INFORMATION
Web site: www.blackbox.com • E-mail: info@blackbox.com
Express
Ethernet Switches:
LB9017A-R3
September, 2004
Advertisement
Table of Contents
Related Manuals for Black Box LB9017A-R3
Summary of Contents for Black Box LB9017A-R3
- Page 1 Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX CUSTOMER FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 SUPPORT Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 INFORMATION Web site: www.blackbox.com • E-mail: info@blackbox.com September, 2004...
- Page 2 FEDERAL COMMUNICATIONS COMMISSION AND CANADIAN DEPARTMENT OF COMMUNICATIONS RADIO FREQUENCY INTERFERENCE STATEMENT This equipment generates, uses and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment.
- Page 3 15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas de energia. 16. El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por un largo periodo de tiempo. 17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación.
-
Page 4: About This Manual
About This Manual Preface This manual describes how to install and use the 16 Ports Web-based Smart Ethernet Switch. The TX ports of the switch introduced here auto-negotiates the presence of 10/100Mbps and full/half-duplex mode and auto-MDIX. In addition, it allows an optional 100BaseFX multi-mode or single-mode fiber module, enabling long distance connection. -
Page 5: Table Of Contents
Table of Contents About This Manual...3 Preface ...3 Table of Contents...4 Product Overview ...5 Front View...5 Figure 1: 16 Ports Web-based Smart Ethernet Switch ...5 Package Contents...5 Product Features ...6 Front Panel Display ...7 Figure 3: Front Panel LEDs...7 Physical Ports ...7 Understanding Front Panel Design ...7... -
Page 6: Product Overview
Product Overview Front View Figure 1: 16 Ports Web-based Smart Ethernet Switch Package Contents When you unpack the product package, you shall find these items listed below. The 16 Ports Switch One AC power cord User’s Manual Please inspect the contents, and report any apparent damage or missing items immediately to your authorized... -
Page 7: Product Features
Product Features ♦ P 16 × 10/100M ROVIDES ♦ A N OPTIONAL SINGLE PORT FIBER MODULE ALLOWS - 100B MULTI MODE FIBER WITH - 100B SINGLE MODE FIBER WITH ♦ A NEGOTIATION FOR SPEED AND DUPLEX MODE ON ♦ 16 : 2K MAC PORTS ADDRESSES... -
Page 8: Front Panel Display
Consult the following table for details. Before you use this table for troubleshooting, make sure the switch is properly connected to power and turned on. Physical Ports The 16 Ports Switch has sixteen or twenty-four 10/100Mbps ports using RJ-45 connectors and provides one slot for the optional single-port fiber module. -
Page 9: Installation
Surrounding electrical devices should not exceed the electromagnetic field (RFC) standards for IEC 801-3, Level 2 (3V/M) field strength. Make sure that the equipment receives adequate ventilation. Do not block the ventilation holes on each side of the switch or on the rear of the equipment. -
Page 10: Installation And Placement Instructions
Desktop or any flat surface The switch can sit on desktop or any flat surface with adequate space and ventilation. If you want to place it onto a shelf, make sure the shelf can withstand the weight of the switch. -
Page 11: Optional Fiber Module Installation
Step 1: Make sure the power is switched off. The module is not hot-swappable. It may cause electric shock or any possible damage to the switch if the power is not switched off. Step 2: Remove the module from the static-free container. -
Page 12: Connecting To Power
Connect one end of the cable to the switch and the other end to a desired device. Step 4: Once the connections between two end devices are made successfully, turn on the power and the switch is operational. User’s Manual... -
Page 13: Network Segmentation
Network Segmentation The maximum segment distance between a node and a directly connected switch port on a 100BaseFX network is 75km using 10/125 (or 9/125)µm single-mode fiber optic cable. It is capable of a maximum span of 2km when 62.5/125 (or 50/125)µm multi-mode fiber optic cable is used. -
Page 14: Switch Configuration
Ethernet Switch from a Web browser (such as Microsoft Internet Explorer or Netscape Navigator) remotely. By connecting to the Ethernet Switch’s console port, you can access the Ethernet Switch’s web interface applications directly in your web browser by entering the default IP address of the Ethernet Switch (192.168.1.10). -
Page 15: Main Menu
The System Change parameters can be displayed by clicking the System Change button in the left sub-menu. Switch Name: Type a switch name and replace the current switch name with a new one. ( Please restart your Computer once the Switch Name is replaced and saved under “ Save Configuration “... -
Page 16: Ip Configuration
IP Address, Netmask, Default Gateway: You can see and change the IP Address, Netmask, and Default Gateway of the Ethernet Switch. Apply: Click the Apply button and apply the new IP Configurations. User’s Manual Express Ethernet Switch: LB9017A-R3 the factory default password. -
Page 17: Port
Flow Control: Choose Enable or Disable to enable or disable the flow control of the ports. Transmit / Receive: Choose On or Off to turn on or off transmit / receive of the ports. Apply: Click the Apply button and apply the new settings of the ports. User’s Manual Express Ethernet Switch: LB9017A-R3... -
Page 18: Vlan
<Note> All Ports have to be selected to one of the VLAN Groups, those Port/Ports were not selected will be notified by the alarm message which shows “ Non-Identify VLAN Group On Port “. User’s Manual Express Ethernet Switch: LB9017A-R3... -
Page 19: Trunking
Trunking Group 1: Click and choose the Port 1, 2 to be added into the Trunking Group 1. Trunking Group 2: Click and choose the Port 9, 10 to be added into the Trunking Group 2. Apply: Click the Apply button and apply the new settings of the Trunking Groups. User’s Manual Express Ethernet Switch: LB9017A-R3... -
Page 20: Save Configuration
Click the Ok or Cancel button to or not to save the configurations. <Note> The Cancel button will discard any data you have changed since the last "Save" operation. Without clicking Ok button, the switch does not save any changes you may have made. -
Page 21: Load Default
Method Performance 148,800pps forwarding rate per port for 100Mbps 14,880pps forwarding rate per port for 10Mbps Chassis Power LED LED Indicators For Console Port: LNK; ACT (2 LEDs) For ports: LNK/ACT; SPEED (2 LEDs) User’s Manual Express Ethernet Switch: LB9017A-R3... -
Page 22: Physical Specifications
16 Ports: 15W Maximum Operating 32° ~ 122°F ( 0° ~ 50°C ) Temperature Storage -13° ~ 158°F ( -25° ~ 70°C ) Temperature Humidity 10 ~ 90%, non-condensing Emissions FCC part 15 Class A, CE Mark User’s Manual Express Ethernet Switch: LB9017A-R3... -
Page 23: Connector Pinouts
Uplink port Input Receive Data + Output Transmit Data + Input Receive Data - Output Transmit Data - Output Transmit Data + Input Receive Data + Output Transmit Data - Input Receive Data - User’s Manual Express Ethernet Switch: LB9017A-R3... -
Page 24: Ordering Information
MMF denotes Multi-Mode Fiber. SMF denotes Single-Mode Fiber. Cable (/125µm) Distance Connector (50µm or 62.5µm) (50µm or 62.5µm) (50µm or 62.5µm) MT-RJ (50µm or 62.5µm) VF-45 (50µm or 62.5µm) 15km (9µm or 10µm) 40km (9µm or 10µm) 75km (9µm or 10µm) Express Ethernet Switch...