Table of Contents
Advertisement
Fixed Base Station and Repeater Installation
1.
Install transmitter in standard rack by using Rack Mounting Kit No. 700-250-13 available from Marti.
ALLOW ONE PANEL SPACE ABOVE AND BELOW TRANSMITTER FOR INLET AIR-FLOW TO
2.
Connect transmitting antenna to ANTENNA connector on SRPT-30/40A rear panel.
3.
Plug transmitter into a 3-prong, grounded 110-120 or 220-240 VAC outlet.
FAILURE TO USE A PROPERLY GROUNDED OUTLET COULD RESULT IN A SAFETY HAZARD
4.
For fixed automatic repeater operation, connect Cable No. 585-143 (FIG. 4.) between accessory connectors of the
receiver and SRPT-30/40A transmitter. Connect receiving antenna to receiver J6 and transmit antenna to SRPT-
30/40A ANTENNA connector.
CAUTION
INTERNAL FAN.
WARNING
OR FAULTY EQUIPMENT PERFORMANCE.
8/7/2003
15
Hide quick links:
Advertisement
Table of Contents
